Beyond Pavers and Lighting, LLC 

Paver Patio, Walkways and Driveway Installer Company 
Jacksonville, Middleburg, Orange Park, Fernandina Beach and Saint Augustine, Florida. 

Paver Driveway Installer


No Deposit Required for Paver Jobs.
Pay when You're Completely Satisfied.

Brick Paver Driveway

A paver driveway installed by Beyond Pavers and Lighting LLC.

“The cost of installing pavers tends to be higher than stamped and colored concrete. However, the long-term value of pavers is realized in their variety of design and color, ease of spot replacement or repair, and resistance to cracking,” says Mark Normington sales representative from Tremron in Jacksonville Florida.

When installed properly over a well-compacted subbase, pavers will not crack, shift or settle under normal vehicle traffic. Ramirez says that a paver driveway will pay for itself over time, both in lower maintenance costs and longevity. “It will last for decades,” he says. “The bed of aggregate beneath the driveway is strong yet flexible. In addition, the joints between the concrete pavers provide the best of both worlds: strength and flexibility. These driveways will not crack due to freezing or thawing.”

Maintenance Paver driveways require minimum maintenance if they are protected with a good sealer and the joints are filled with a polymer sand, which contains a special polymeric additive that binds and hardens the sand and helps to prevent erosion. “If joints are filled with polymer sand at original installation, the need to refill joint sand in 2 to 3 years is usually eliminated,” says Normington. “For the best appearance, you should reapply a sealer every few years.”

To regularly maintain a paver driveway, remove dirt and leaves by sweeping and occasional rinsing. For heavy oil or grease stains, use a pressure washer with an appropriate cleaning solution. Concrete pavers may settle in spots over time if they aren’t installed properly. However, they can easily be reset with no noticeable patchwork. Simply remove the affected pavers, regrade and recompact the subbase, and reinstall the pavers.

In the winter, paver driveways can be plowed or shoveled without dislodgement because they typically have chamfered edges and joints. However, don’t use sharp objects to chop ice, which can damage the pavers. Instead, add traction with sand or apply a noncorrosive deicer, such as calcium magnesium acetate. Avoid the use of sodium chloride (rock salt) and calcium chloride, which can harm the pavers and cause efflorescence.

Buying and installation tips:

  • To ensure the best performance, use a minimum of  6 inches of well-compacted base material when installing paver driveways.
  • Use concrete pavers with a minimum compressive strength of 8,000 psi and a maximum water absorption rate of 5%.
  • To prevent shifting of concrete pavers, edge restraints anchored by spikes or concrete will be installed prior to paver placement.
  • The use of darker colored pavers for driveways will help to melt snow faster and hide stains. 
  • Cooler paver with lighter color.
  • In cold climates, consider installing a snow-melting system beneath the pavers to eliminate snow and ice removal.
Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

Call (904)258-1145